Since downloading 5.59 I have noticed a change in the way it ramps in on the outline. I'm not sure I understand the new changes so here is what is happening. It drops in to full depth then ramps up to skin thickness and cuts. Am I going to have to change my settings now or is this a glitch?
Forrest
parimeter ramp issue
Moderators: Mike Iubelt, Jason Susnjara, Larry Epplin, Clint Buechlein, Mike Iubelt, Jason Susnjara, Larry Epplin, Clint Buechlein
-
Forrest Chapman
- eCabinets Beta Tester
- Posts: 1260
- Joined: Mon, May 30 2005, 2:26PM
- Location: Anderson SC.
- Contact:
-
Ryan Hochgesang
Re: parimeter ramp issue
Forrest,
I'm not seeing this issue here when doing some general testing, could you please send me you EXPORT file along with the CNC code you created and the cabinet design file? Email: program@thermwood.com
Thanks!
I'm not seeing this issue here when doing some general testing, could you please send me you EXPORT file along with the CNC code you created and the cabinet design file? Email: program@thermwood.com
Thanks!
-
Ryan Hochgesang
Re: parimeter ramp issue
Thanks for the supporting files Forrest, I see your issue and will get with Engineering for resolution.
