I am adding a dbx and drawer front to a cabinet. I select that I want the Conastoga slab drawer front. When I add the dbx and drawer front I select that I want the slab rotated 90 degrees. It is NOT being rotated. grain direction remains horizontal no matter what I try and do.
Should it be rotated?
Door/Drawer editor question
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
Donald Thomson
- Guru Member
- Posts: 846
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Door/Drawer editor question
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
Scott G Vaal
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Door/Drawer editor question
Donald,
No, the grain rotation is only for sheet stock slab doors and drawer fronts (doors or drawers saved as a slab type).
No, the grain rotation is only for sheet stock slab doors and drawer fronts (doors or drawers saved as a slab type).
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
