After having some mysterious problems with the HD on my CS43 I ended up having it ghosted and replaced with a SSD, very happy with the solid state, nesting is much faster.
Somewhere along the line with all the testing of the old and new drives my CPU clock somehow reset and has thrown off my maitence schdule, basically it thinks I am -111000 hrs past due. Doing an item reset doesn't work, it just crashes the supercontrol. is there a file i can delete to fix this.
Another issue is that the machine won't physically boot, even though I have set up the correct boot sequence every time I shut the machine down I have to take the side panel off and hit the button on the mother board to start it up. As a result I just set it up to go into sleep mode when not in use. Not entirely sure if this will be good in the long run but i don;t see how it could seriously effect anything
Any thoughts?
New HD issues
Moderators: Mike Iubelt, Jason Susnjara, Larry Epplin, Clint Buechlein, Mike Iubelt, Jason Susnjara, Larry Epplin, Clint Buechlein
-
Marcel Thibodeau
- Junior Member
- Posts: 27
- Joined: Thu, Jan 02 2014, 5:46PM
- Company Name: Northwest Kitchen Centre
- Country: CANADA
-
Gerry A Brown
- Senior Member
- Posts: 140
- Joined: Fri, May 27 2005, 8:56AM
- Company Name: Old Style Woodwork
- Country: CANADA
- Location: Southern Alberta
Re: New HD issues
Hi Marcell,
You might want to check if the windows partition is marked as active. Sometime when restoring a drive clone the partition is not flagged properly.
Gerry
You might want to check if the windows partition is marked as active. Sometime when restoring a drive clone the partition is not flagged properly.
Gerry
