Morning All,
I am needing to assist a customer to tram (re-align) the head on his Model 67.
Can anyone perhaps share the PDF walk-through that is on the Model 67 for tramming the head.
My client doesn't seem to have the correct PDF on his Model 67 control.
Any tips on how to perform this with the least hassle will be welcome as well!
Thanks!
Tramming of 5-Axis Model 67
Moderators: Mike Iubelt, Jason Susnjara, Clint Buechlein, Mike Iubelt, Jason Susnjara, Clint Buechlein
-
Rayno von Schlicht
- New Member
- Posts: 4
- Joined: Fri, Aug 11 2017, 12:16PM
- Company Name: Rind Routing Services
- Country: SOUTH AFRICA
- Contact:
-
Dennis Palmer
- Thermwood Team
- Posts: 246
- Joined: Tue, May 17 2005, 1:32PM
- Company Name: Thermwood Corporation
- Country: UNITED STATES
- Location: Thermwood
Re: Tramming of 5-Axis Model 67
Hello Rayno,
I was notified that you had received the information requested soon after your initial post. I assume all is good, since generally, no news is good news.
All the best!
I was notified that you had received the information requested soon after your initial post. I assume all is good, since generally, no news is good news.
All the best!