No picture of cab
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
Marvin Pate
- Junior Member
- Posts: 29
- Joined: Thu, Feb 23 2006, 8:09PM
- Company Name: Pate Cabinets
- Country: UNITED STATES
- Location: Raleigh, North Carolina
No picture of cab
When I click on develop cabinets or assemblies and then click on an existing cabinet, no cabinet picture comes up. The information box does list the cabinet specs. Also when doing batch cabs no picture of nested parts comes up. I had a virus on the computer which was supposed to be fixed by the Geek Squad. Thanks for your advice. Marvin
-
Scott Marshburn
- Guru Member
- Posts: 867
- Joined: Sat, Mar 05 2011, 7:29AM
- Company Name: Heritage WoodWorks
- Country: UNITED STATES
- Location: Jacksonville Nc
- Contact:
Re: No picture of cab
Hey Marvin.
The first thing that I would try is to run the repair option. Close ecabinents then In the control panel select programs, select programs, and features then. select ecabinet systems 6.2.6, click the repair option. after it has finished open ecabinents and see if this fixed the problem. If not , you may have to uninstall ecabinents and reinstall the current version.
Hope this helps.
The first thing that I would try is to run the repair option. Close ecabinents then In the control panel select programs, select programs, and features then. select ecabinet systems 6.2.6, click the repair option. after it has finished open ecabinents and see if this fixed the problem. If not , you may have to uninstall ecabinents and reinstall the current version.
Hope this helps.
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
-
Marvin Pate
- Junior Member
- Posts: 29
- Joined: Thu, Feb 23 2006, 8:09PM
- Company Name: Pate Cabinets
- Country: UNITED STATES
- Location: Raleigh, North Carolina
Re: No picture of cab
I uninstalled ecabinets and reinstalled. Restarted the computer. Did this evolution two separate times. Still have the problem. I checked the graphics card and got a message that it was working okay and that I had the current version of the driver.
-
Clint Buechlein
- Thermwood Team
- Posts: 785
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
Re: No picture of cab
Marvin,
Go to Edit, and then Settings/Preferences. Check the boxes for Force Software Rendering and Use Graphics Double Buffering. Click OK to exit Settings/Preferences and OK on the next dialog. Close eCabinets and open it back up. See if the issue persists. If it doesn't and the cabinet shows up as it is supposed to, it is graphical related.
-Clint-
Go to Edit, and then Settings/Preferences. Check the boxes for Force Software Rendering and Use Graphics Double Buffering. Click OK to exit Settings/Preferences and OK on the next dialog. Close eCabinets and open it back up. See if the issue persists. If it doesn't and the cabinet shows up as it is supposed to, it is graphical related.
-Clint-
-
Marvin Pate
- Junior Member
- Posts: 29
- Joined: Thu, Feb 23 2006, 8:09PM
- Company Name: Pate Cabinets
- Country: UNITED STATES
- Location: Raleigh, North Carolina
Re: No picture of cab
Clint,
Thank you for the response. I performed the steps you described and the program did load cabinet pics however the response to commands were extremely slow. The pics would hardly move and are too slow to use. I will look into having a new graphics card installed. Have a great day.
Marvin
Thank you for the response. I performed the steps you described and the program did load cabinet pics however the response to commands were extremely slow. The pics would hardly move and are too slow to use. I will look into having a new graphics card installed. Have a great day.
Marvin
-
Clint Buechlein
- Thermwood Team
- Posts: 785
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
Re: No picture of cab
Marvin,Marvin Pate wrote:Clint,
Thank you for the response. I performed the steps you described and the program did load cabinet pics however the response to commands were extremely slow. The pics would hardly move and are too slow to use. I will look into having a new graphics card installed. Have a great day.
Marvin
The slow operation is a side effect of having those options checked. Most likely you just need to update the graphics card driver. If you performed the check through Windows, it likely isn't the latest driver available, just what Windows deems the most stable. Go to the manufacturer's site of the card to find the latest driver. That may get you a fix rather than having to buy a new card.
-Clint-
