Was there a change to the Cut list file, specifically DoorDrawerFrontsBIH Listing page.
I used this to get sizes for all the doors and panels that I would have in a job.
There used to be a coloum for the cabinet name. Used this to double check doors sizes
and when allocating doors.
Did this change???
Cut List File
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 80
- Joined: Wed, Jul 20 2005, 7:29AM
- Company Name: Silhouette Custom Cabinets
- Country: CANADA
- Location: Hamilton, Ontario
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Cut List File
The job I ran a couple of weeks ago had all the info you're asking for. Is word wrap formatting turned on for any columns in the spreadsheet, hiding info?
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Junior Member
- Posts: 80
- Joined: Wed, Jul 20 2005, 7:29AM
- Company Name: Silhouette Custom Cabinets
- Country: CANADA
- Location: Hamilton, Ontario
Re: Cut List File
Can you post a sample of that file please.
-
- Junior Member
- Posts: 80
- Joined: Wed, Jul 20 2005, 7:29AM
- Company Name: Silhouette Custom Cabinets
- Country: CANADA
- Location: Hamilton, Ontario
Re: Cut List File
Here is a sample of the file. I have deleted some of the columns.
Qty Height Width Name
1 55.5 14.875 Shaker Cabinet No. B2 - 21-03-08 brandy lake kit/ T2D 30w 55-5h 16d 30 W X 55.5 H X 16 D (Upper)
1 55.5 14.875 Shaker Cabinet No. B2 - 21-03-08 brandy lake kit/ T2D 30w 55-5h 16d 30 W X 55.5 H X 16 D (Upper)
1 30 17.875 Shaker Cabinet No. B15 - 21-03-08 brandy lake kit/ B2D 36w 36 W X 34.5 H X 23.5 D (Base)
1 30 17.875 Shaker Cabinet No. B15 - 21-03-08 brandy lake kit/ B2D 36w 36 W X 34.5 H X 23.5 D (Base)
1 30 14.875 Shaker Cabinet No. B1 - 21-03-08 brandy lake kit/ B2D 30w 30 W X 34.5 H X 16 D (Base)
1 30 14.875 Shaker Cabinet No. B1 - 21-03-08 brandy lake kit/ B2D 30w 30 W X 34.5 H X 16 D (Base)
As you can see there is the cabinet #, name etc.....
Qty Height Width Name
1 55.5 14.875 Shaker Cabinet No. B2 - 21-03-08 brandy lake kit/ T2D 30w 55-5h 16d 30 W X 55.5 H X 16 D (Upper)
1 55.5 14.875 Shaker Cabinet No. B2 - 21-03-08 brandy lake kit/ T2D 30w 55-5h 16d 30 W X 55.5 H X 16 D (Upper)
1 30 17.875 Shaker Cabinet No. B15 - 21-03-08 brandy lake kit/ B2D 36w 36 W X 34.5 H X 23.5 D (Base)
1 30 17.875 Shaker Cabinet No. B15 - 21-03-08 brandy lake kit/ B2D 36w 36 W X 34.5 H X 23.5 D (Base)
1 30 14.875 Shaker Cabinet No. B1 - 21-03-08 brandy lake kit/ B2D 30w 30 W X 34.5 H X 16 D (Base)
1 30 14.875 Shaker Cabinet No. B1 - 21-03-08 brandy lake kit/ B2D 30w 30 W X 34.5 H X 16 D (Base)
As you can see there is the cabinet #, name etc.....
-
- Junior Member
- Posts: 80
- Joined: Wed, Jul 20 2005, 7:29AM
- Company Name: Silhouette Custom Cabinets
- Country: CANADA
- Location: Hamilton, Ontario
Re: Cut List File
Hello All,
I reviewed one of the comments by Donald and he was correct. We recently updated some of our spreadsheet soft ware and some of the setting changed.
Once I checked the file again and made the changes to the format, POW the info I was looking for was back again. I would like to thank all those who responded.
Revised settings
Qty Vendor Style Material Height Width Thickness Name
1 Slab Door \ Doors \ Saved \ Slab \ silhouette \ 750 Maple Veneer Slab Door<br>(Hinge Side: Left) 750 Maple/maple 30" 11.875" 0.75" Cabinet No. B1 - 21-05-12 lucchesi/ B2DVan 24w 34-5h 21-5d 24"W X 34.5"H X 21.5"D (Base)
1 Slab Door \ Doors \ Saved \ Slab \ silhouette \ 750 Maple Veneer Slab Door<br>(Hinge Side: Right) 750 Maple/maple 30" 11.875" 0.75" Cabinet No. B1 - 21-05-12 lucchesi/ B2DVan 24w 34-5h 21-5d 24"W X 34.5"H X 21.5"D (Base)
2 Slab Drawer Front \ Drawers \ Saved \ Slab \ silhouette slab drawers \ 750 Maple Slab Drawer 750 Maple/maple 7.375" 15.875" 0.75" Cabinet No. B2 - 21-05-12 lucchesi/ B3Dr 16w 34-5h 21-5d 16"W X 34.5"H X 21.5"D (Base)
2 Slab Drawer Front \ Drawers \ Saved \ Slab \ silhouette slab drawers \ 750 Maple Slab Drawer 750 Maple/maple 7.375" 15.875" 0.75" Cabinet No. B2 - 21-05-12 lucchesi/ B3Dr 16w 34-5h 21-5d 16"W X 34.5"H X 21.5"D (Base)
2 Slab Drawer Front \ Drawers \ Saved \ Slab \ silhouette slab drawers \ 750 Maple Slab Drawer 750 Maple/maple 14.9584" 15.875" 0.75" Cabinet No. B2 - 21-05-12 lucchesi/ B3Dr 16w 34-5h 21-5d 16"W X 34.5"H X 21.5"D (Base)
Have a great day everyone.
I reviewed one of the comments by Donald and he was correct. We recently updated some of our spreadsheet soft ware and some of the setting changed.
Once I checked the file again and made the changes to the format, POW the info I was looking for was back again. I would like to thank all those who responded.
Revised settings
Qty Vendor Style Material Height Width Thickness Name
1 Slab Door \ Doors \ Saved \ Slab \ silhouette \ 750 Maple Veneer Slab Door<br>(Hinge Side: Left) 750 Maple/maple 30" 11.875" 0.75" Cabinet No. B1 - 21-05-12 lucchesi/ B2DVan 24w 34-5h 21-5d 24"W X 34.5"H X 21.5"D (Base)
1 Slab Door \ Doors \ Saved \ Slab \ silhouette \ 750 Maple Veneer Slab Door<br>(Hinge Side: Right) 750 Maple/maple 30" 11.875" 0.75" Cabinet No. B1 - 21-05-12 lucchesi/ B2DVan 24w 34-5h 21-5d 24"W X 34.5"H X 21.5"D (Base)
2 Slab Drawer Front \ Drawers \ Saved \ Slab \ silhouette slab drawers \ 750 Maple Slab Drawer 750 Maple/maple 7.375" 15.875" 0.75" Cabinet No. B2 - 21-05-12 lucchesi/ B3Dr 16w 34-5h 21-5d 16"W X 34.5"H X 21.5"D (Base)
2 Slab Drawer Front \ Drawers \ Saved \ Slab \ silhouette slab drawers \ 750 Maple Slab Drawer 750 Maple/maple 7.375" 15.875" 0.75" Cabinet No. B2 - 21-05-12 lucchesi/ B3Dr 16w 34-5h 21-5d 16"W X 34.5"H X 21.5"D (Base)
2 Slab Drawer Front \ Drawers \ Saved \ Slab \ silhouette slab drawers \ 750 Maple Slab Drawer 750 Maple/maple 14.9584" 15.875" 0.75" Cabinet No. B2 - 21-05-12 lucchesi/ B3Dr 16w 34-5h 21-5d 16"W X 34.5"H X 21.5"D (Base)
Have a great day everyone.