Post processors for Aspire

Stuart Douglas · Post by **Stuart Douglas** » Mon, May 15 2017, 9:54AM

I recently began helping a friend use his new desktop CNC which he bought with Vectric Aspire. His files post fine (CamMaster), but If I try to post to one of the Thermwood PP's it errors out on my machine. I am using a CS43 5-12. Is there a post processor specifically for this machine? The PP's on the vectric software look to be either for the CS45 or a generic .NC file. Is anyone on this forum using this software with your CS43 and which PP do you use?

It looks as though the documentation indicates that you could write your own PP for whatever machine you are trying to use, but I'm not that talented yet.

Joe Harger · Post by **Joe Harger** » Thu, Jun 01 2017, 8:59AM

Stuart, can you give me a call when you get a chance to talk about what is going on with post?

Joe Harger
Product/Software Manager
Thermwood Corporation
1-800-533-6901 ext. 259

Stuart Douglas · Post by **Stuart Douglas** » Fri, Jun 02 2017, 9:53AM

Joe,

That post for our CS43 with the QCore worked with the sample file I was trying, seems to be perfect. Thanks for the help.

Joe Harger · Post by **Joe Harger** » Fri, Jun 02 2017, 10:04AM

Great, Thanks for the update.

Gordon Mitchell · Post by **Gordon Mitchell** » Sun, Apr 30 2023, 6:35PM

Hi Stuart, I saw this post and just recently tried my hand at aspire trial using there post processor for the qcore processor and seem to be getting nowhere. Do you have that post processor info that was sent to you? I have the CS43-510 built in 2014 so I'm figuring this will work for me.

Thanks
Gordon M.

Thermwood / eCabinet Systems

Post processors for Aspire

Post processors for Aspire

Re: Post processors for Aspire

Re: Post processors for Aspire

Re: Post processors for Aspire

Re: Post processors for Aspire