Some doors are corrupt

Leo Graywacz · Post by **Leo Graywacz** » Sat, Oct 23 2010, 6:53PM

Hi all, some of me Conastoga doors seem to be corrupt. When I select them it takes about 2 1/2 minutes before my computer becomes active again. The door shows up but the view isn't there. You can't do a full view.

Scott G Vaal · Post by **Scott G Vaal** » Mon, Oct 25 2010, 10:04AM

Leo,

Are these doors that you have saved or doors you are loading from the standard directory? If it is doors that you saved, please get us one of them.

Leo Graywacz · Post by **Leo Graywacz** » Mon, Oct 25 2010, 11:56AM

Standard Conastoga directory.

Scott G Vaal · Post by **Scott G Vaal** » Mon, Oct 25 2010, 12:12PM

Leo,

I would try rebooting your PC and see if that helps the issue. If that does not work, re-run the V6 Bld 5 install and choose the Repair option.

Leo Graywacz · Post by **Leo Graywacz** » Mon, Oct 25 2010, 12:36PM

OK I'll see if that does anything. Thanks.

Thermwood / eCabinet Systems

Some doors are corrupt

Some doors are corrupt

Re: Some doors are corrupt

Re: Some doors are corrupt

Re: Some doors are corrupt

Re: Some doors are corrupt