What is the maximum Z cut on a 43. I can't find this in the specifications on the website and I don't have access to the manual.
Kerry
CS-43 Question
Moderators: Mike Iubelt, Jason Susnjara, Larry Epplin, Clint Buechlein, Mike Iubelt, Jason Susnjara, Larry Epplin, Clint Buechlein
-
Kerry Fullington
- Wizard Member
- Posts: 4734
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
-
Ryan Hochgesang
Re: CS-43 Question
Hi Kerry,
The Model 43 has 4 inches clearance, but we utilize 9.5" of stroke due to tool change requirements. The spindle manufacturer has a 3.25 tool length limitation. If you look at the Side view on the Dimensions page for 43, it will also give you an idea of how the clearance is defined.
The Model 43 has 4 inches clearance, but we utilize 9.5" of stroke due to tool change requirements. The spindle manufacturer has a 3.25 tool length limitation. If you look at the Side view on the Dimensions page for 43, it will also give you an idea of how the clearance is defined.