Search found 190 matches

by Tim Massa
Thu, Jan 22 2015, 5:44PM
Forum: eCabinet Systems Software
Topic: Drawer front issues
Replies: 5
Views: 3016

Re: Drawer front issues

Same results trying a 'standard' Ecab box and not my go to Seed Cab. This seems like a fairly common operation not to be noticed by now. Wondering if my software might need repair?
by Tim Massa
Thu, Jan 22 2015, 5:16PM
Forum: eCabinet Systems Software
Topic: Drawer front issues
Replies: 5
Views: 3016

Re: Drawer front issues

Tried it on a fresh cab. Same issue. Drawer fronts overlap one another when going from door/drawer front editor back into main cab editor.
by Tim Massa
Thu, Jan 22 2015, 5:00PM
Forum: eCabinet Systems Software
Topic: Drawer front issues
Replies: 5
Views: 3016

Drawer front issues

Anyone experience problems with drawer fronts holding their reveal when exiting the door/ drawer editor? I have ben trying to get this cabinet to take a 7" high drawer front at the top of the three partitioned spaces. Drawers fronts will install fine but will jack up when returning to main edit...
by Tim Massa
Sun, Jan 11 2015, 5:23PM
Forum: eCabinet Systems Software
Topic: Link nesting issues.
Replies: 1
Views: 1202

Re: Link nesting issues.

Found it!
Very stupid. I had 'Straight Line' selected somehow and not true shape. Answer was staring at me.

Tim
by Tim Massa
Sun, Jan 11 2015, 4:04PM
Forum: eCabinet Systems Software
Topic: Link nesting issues.
Replies: 1
Views: 1202

Link nesting issues.

Having an issue between two computers and within a computer with nesting in Ecab link. I have Link software on my design computer that I will drop TWD files into and be able to print off labels and reports from office printer. I'll also use the Link to get a dead accurate material takeoff from the n...
by Tim Massa
Wed, Nov 19 2014, 9:54AM
Forum: eCabinet Systems Software
Topic: Nesting trouble in Link
Replies: 2
Views: 1216

Re: Nesting trouble in Link

Thanks Tim,

I'll try fiddling with the Link settings some more to see if I can get it to nest. Much appreciated.

Tim
by Tim Massa
Tue, Nov 18 2014, 7:27PM
Forum: eCabinet Systems Software
Topic: Nesting trouble in Link
Replies: 2
Views: 1216

Nesting trouble in Link

Hi All, STILL having trouble with the back of the larger cabinet from this assembly nesting in Ecab Link. It will now nest in Ecabs but gets spit out in the link nest. Would anyone be able to take a look at what may be causing this issue? I'm using a .25" collar and cutting with .25" M.C. ...
by Tim Massa
Tue, Nov 18 2014, 7:18PM
Forum: eCabinet Systems Software
Topic: Even width doors on cabinets
Replies: 4
Views: 2265

Re: Even width doors on cabinets

Thanks Guys,
Looks like I'll have to get Excel.

Dennis,
I assume that is what your calculator works in?

Tim
by Tim Massa
Fri, Nov 14 2014, 3:18PM
Forum: eCabinet Systems Software
Topic: Even width doors on cabinets
Replies: 4
Views: 2265

Even width doors on cabinets

Anyone figure out how to get this done for a cabinet having 3 doors. My usual workaround is to take it into cad and draw a quick horizontal cut to get partition spacing. I use that to locate the partition in ecabs and ignore what the software has spit out for door widths, relying on cad drawing for ...
by Tim Massa
Mon, Nov 10 2014, 8:18AM
Forum: eCabinet Systems Software
Topic: Nesting Material issues
Replies: 4
Views: 1987

Re: Nesting Material issues

Wow, I stared at the answer twice and still read it wrong. My eyes must be composting with age. Thanks you Joe and Rick. Much appreciated
by Tim Massa
Thu, Nov 06 2014, 7:39PM
Forum: eCabinet Systems Software
Topic: Nesting Material issues
Replies: 4
Views: 1987

Re: Nesting Material issues

Hi Joe, Yes it is. I was working under the assumption that if the material has no grain orientation then the nest would put the rectangle shapes inside the material rectangle, going large to small rectangles, in the most efficient way. Also, the .77 MDF material won't nest at all. AGain, no grain an...
by Tim Massa
Thu, Nov 06 2014, 4:26PM
Forum: eCabinet Systems Software
Topic: Nesting Material issues
Replies: 4
Views: 1987

Nesting Material issues

Would anyone know why the .77 MDF material in this batch of cabinets won't nest? I've looked at the material specs; no grain, 97" x 49", etc and can see no reason why it will not nest. Likewise the storage cabinets' back will not nest although it's 46.5L in one direction and 68.55" wi...
by Tim Massa
Thu, Nov 06 2014, 4:19PM
Forum: eCabinet Systems Software
Topic: Width of angled back on corner cab
Replies: 3
Views: 1222

Re: Width of angled back on corner cab

Thanks Scott!
by Tim Massa
Wed, Nov 05 2014, 9:57AM
Forum: eCabinet Systems Software
Topic: Width of angled back on corner cab
Replies: 3
Views: 1222

Width of angled back on corner cab

Would anyone be able to remind me if there is a way to change the width of the angled (center) back of the 90 degree corner cab? If it can be eliminated at all?

Thanks,
Tim
by Tim Massa
Thu, Apr 17 2014, 8:59AM
Forum: eCabinet Systems Software
Topic: Door/Drawer editor problem?
Replies: 2
Views: 1589

Door/Drawer editor problem?

Hi all, Just wondering if anyone else is experiencing issues when taking a cabinet previously saved cabinet back into drawer/door front box editor and deleting/reinstalling a drawer front (with box), there's a 50/50 chance that the drawer front will size correctly and in the right location. This is ...

Go to advanced search