Search found 97 matches

by mohan kommineni
Wed, Sep 15 2010, 9:08PM
Forum: Thermwood 3-Axis Machinery
Topic: issues with CN 5.59 metric machie
Replies: 17
Views: 2104

Re: issues with CN 5.59 metric machie

Hello Ryan I have figured out the issue i think its different issue its fine with dado as per your test, but if u have a pocket that is manually created pocket or a slot in ecabinets then it is not working, i have sent the separate cab file with out 5mm tool in that group and the required twd to tes...
by mohan kommineni
Wed, Sep 15 2010, 6:58PM
Forum: Thermwood 3-Axis Machinery
Topic: issues with CN 5.59 metric machie
Replies: 17
Views: 2104

Re: issues with CN 5.59 metric machie

#1.) I have created a general cab side with dado of 3/8", then made sure was NO tooling that could cut this dado (slightly smaller dia. tool than dia. or large enough dia. tool to cut dado within two passes) and did get the expected error of tool NOT FOUND. Maybe if I review your supporting fi...
by mohan kommineni
Wed, Sep 15 2010, 6:54PM
Forum: Thermwood 3-Axis Machinery
Topic: issues with CN 5.59 metric machie
Replies: 17
Views: 2104

Re: issues with CN 5.59 metric machie

With regards to item #3: I don't mean to offend anyone, but I find this to be absolutely broken. I am frequently asked to "fill up the sheet" with miscellaneous parts, and I no longer have the ability to do this in the load screen. As Mohan stated, having the ability to change the quantit...
by mohan kommineni
Wed, Sep 15 2010, 6:47PM
Forum: Thermwood 3-Axis Machinery
Topic: issues with CN 5.59 metric machie
Replies: 17
Views: 2104

Re: issues with CN 5.59 metric machie

Hello, I've just experienced the same ramp in problem that was spoken about in number 4. I changed my ramp in depth to .1 for now. That may be a temporary solution for you Mohan until the the situation is resolved. Mark Hello mark i would try that for now and i feel this issue will be addressed soo...
by mohan kommineni
Wed, Sep 15 2010, 8:33AM
Forum: Thermwood 3-Axis Machinery
Topic: issues with CN 5.59 metric machie
Replies: 17
Views: 2104

Re: issues with CN 5.59 metric machine

Mahon, Regarding Statement/Question #3: 3)cannot change the quantity to the required due to the recent upgrade as the quantity is being controled in the first line and all the parts qty is always 1 say even i need 3 cabs the parts remain same 1and the line 1shows 3cabs but lets assume i am repeatin...
by mohan kommineni
Tue, Sep 14 2010, 6:03AM
Forum: Thermwood 3-Axis Machinery
Topic: issues with CN 5.59 metric machie
Replies: 17
Views: 2104

Re: issues with CN 5.59 metric machie

thanks for that mark it helped me to solve 1 issue

thank you
by mohan kommineni
Mon, Sep 13 2010, 9:03AM
Forum: Thermwood 3-Axis Machinery
Topic: issues with CN 5.59 metric machie
Replies: 17
Views: 2104

issues with CN 5.59 metric machie

hi all i have updated the machine with latest version and iam noticing different issues 1) not asking for a tool if a certain diameter tool is not setup it just takes any available last tool in that group (i.e if the slot is 6mm wide still if there is no tool of that size it starts cutting using 9.5...
by mohan kommineni
Mon, Aug 09 2010, 1:23AM
Forum: eCabinet Systems Software
Topic: not able to put doors and drawers here
Replies: 2
Views: 494

not able to put doors and drawers here

hi all we are tying to build a shop counter and getting stuck here this cabinet has got 3 sections in which we want to have drawers on the both end sections and doors in the middle section but where as in the door and drawer selection it is selecting all the space as a single section where are we go...
by mohan kommineni
Tue, Jun 15 2010, 8:57PM
Forum: Thermwood 3-Axis Machinery
Topic: SEVRE ERROR MESSAGE
Replies: 5
Views: 1024

Re: SEVRE ERROR MESSAGE

Are you first shutting down the Thermwood software (Alt+X) before running the updates? If so, try the following: Download the attached 4.0 install file, rename it, changing the .txt extension to .exe, save it to your control desktop, shut down THM software (Alt+X), run the 4.0 install file, then ru...
by mohan kommineni
Mon, Jun 14 2010, 5:49PM
Forum: Thermwood 3-Axis Machinery
Topic: SEVRE ERROR MESSAGE
Replies: 5
Views: 1024

Re: SEVRE ERROR MESSAGE

Mohan, I would suggest running the latest control nesting update file that you have and choose the REPAIR option. It seems some files have been corrupt or misplaced on the hard drive of controller. i have done the repair using the latest update but still it is same, any other way to fix it as it is...
by mohan kommineni
Mon, Jun 14 2010, 12:36AM
Forum: Thermwood 3-Axis Machinery
Topic: SEVRE ERROR MESSAGE
Replies: 5
Views: 1024

SEVRE ERROR MESSAGE

hi all all of a sudden today when i open control nesting i get this message attached
not sure why is this happening can someone look into this oce i click ok it message appears again
afterv two times it closes but sure got some issue in nesting also
pls suggest

regards
mohan
by mohan kommineni
Tue, Apr 20 2010, 8:50PM
Forum: Thermwood 3-Axis Machinery
Topic: Reqd Tool Numbers Listed at Beginning of CNC Code
Replies: 2
Views: 639

Re: Reqd Tool Numbers Listed at Beginning of CNC Code

that would be a fast and asy way to change jobs and more economical if thermwood can implement this option

mohan
by mohan kommineni
Tue, Apr 20 2010, 1:14AM
Forum: Thermwood 3-Axis Machinery
Topic: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)
Replies: 7
Views: 1277

Re: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

Larry Epplin wrote:I recommend upgrading to Version 6.0 Build 4 upon it's release.

hi larry
i also noticed one more issue in cn once nested if gong back into load menu due to any reson all the dimensions are in inches we are using mm
this is really mess try to suggest
thanks
by mohan kommineni
Tue, Apr 20 2010, 1:11AM
Forum: Thermwood 3-Axis Machinery
Topic: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)
Replies: 7
Views: 1277

Re: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

Larry Epplin wrote:I recommend upgrading to Version 6.0 Build 4 upon it's release.


hi larry u mean to sAy version 5 is no longer supported or u peolple are forcing us to switch to version 6
by mohan kommineni
Mon, Apr 19 2010, 5:59PM
Forum: Thermwood 3-Axis Machinery
Topic: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)
Replies: 7
Views: 1277

Re: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

This is an issue with eCabinets that will be resolved in the next update to Version 6. There were changes performed for optimization in Control Nesting that exposed the error from eCabinets. Until the release of Version 6 Build 4 you will need to uncheck these problem parts in the Load screen. Sorr...

Go to advanced search