Thermwood / eCabinet Systems

Tim,

I deleted out the shelves and partition in that section and added them back in and it all seems to work fine now. I noticed that the partition and the fixed shelves on the right of that partition were gaped away or not quite positioned correctly. Any idea how you got the cabinet to this state ...

Zach,

It works correctly for me if I create the directory named LD ACCESSORIES and save a cabinet named SKIN into it. Make sure your directory and cab name match (unmatched spellings or spaces will cause failure). Do you get any error message when you run it?

tim lucas wrote:Thanks Scott, maybe someday

Tim,

I will certainly add it to the wish list for you.

Tim,

Sorry, the link does not support pocket screw machining.

John,

You cannot add pocket screw construction to a display panel. Only cabinet parts will allow a construction method to be added.

Now, with that said, you can take a cabinet and remove all parts but the back and use it as a display panel and get the construction added. I will attach a cabinet ...

Tim,

Sorry, we currently do not have a rotate function in the contour area, but you can use the mirror function to achieve this by mirroring about a 45 degree line. Do the following:

1.) Go to Contour area and load your Geometry.
2.) Select Line Mode, key in the start point at 1,1 Enter, then for ...

Chris,

1.) Save the dxf from the website in the orientation desired.
2.) Go to Part Editor, then Contour.
3.) Select the Load Geometry icon (1st icon from left for the Contour area -- looks like a hand reaching into a file folder) or select Load Geometry from the right-click menu.
4.) Select the ...

Is there a way to take a countertop into the constraint manager so I can turn circle cutouts into oval cutouts?

Trying to add oval sink cutouts in a vanity countertop.

Don,
Countertops are not supported by the constraint manager.

But, I have a link to a website that will create any size oval ...

Don,

As Ralph mentioned, you can go to Render view, right-click on a wall, then select Hide Wall Only.

Daren,

I've tested the Cabinet Group Parts level and it all seems to work correctly in the link. What version of the Link are you using? Make sure you remove all parts from the Assembly Grouping and then add the doors/drawer front to a Cabinet Group Parts. If you still have trouble getting this to ...

Daren,

Sorry, the ShopBot Link currently does not support Assembly Grouped doors/drawer fronts. I will get it listed and hopefully implemented in a future release.

Mark Hesketh wrote:Ok, so just fill in the standard excel info but leave the width and depth fields blank?

Mark,

Those fields are ignored for corner cabinets, so you can leave them blank or have something in them as well and it will not matter. Hope this helps.

Calvin,

You may have to change your Place Mode to Free Style to get it to move.

Nat,

I see two possibilities.

Option A (if you want the shelf holes, I would go with this option) :
1.) Add the backs on the cabinet using 3/4 Closet material.
2.) Set the left back to a phantom part.
3.) Part edit the right back chopping the whole left edge away.
4.) Set it to the width you want ...

Tim,

I have finally narrowed it down. The shuffled cab number order in the Shopbot link happens when you change the order of cabinets in the batch. If you add them to a batch and leave the order alone, it will stay sequential in the link. I will add this to the list and see if they can resolve that ...