Thermwood / eCabinet Systems

New pic

That’s ok.
My father always said that if you make one person laugh in your lifetime then you have added to this world.
My wife always tells me that she doesn’t think that it counts if it’s you.

It’s a work in progress, i didn’t relies the Benchtop wasn’t displaying correctly until i went to put the sink in.

Well there you go, mark you’re a legend.
I re made the top 5 times and it would not work. so i tried what you said and saved the job as something else, started a new job with 1 cabinet and put the Benchtop on it in 40mm and it worked. WTF
So i reopened the job under the new name re did the Benchtop ...

Cant upload my job file i get an error my job file is too big (8,807kb zipped) i have removed all cabs not needed from the file but for some reason my job file size stays the same, any suggestions on reducing it?.
It has a 20mm overhang and its flush at the back so you would see the front edge as ...

It has a 20mm overhang and its flush at the back so you would see the front edge as 40mm even if it was in the cab.

the countertop thickness is not displaying correctly. I have designed the countertop with a material thickness of 40mm but it displays as 20mm. if you hover over it shows as 40mm (counter pic) but still displays as 20mm (counter2 pic not the 40mm display cube). Is this a bug or am i doing something ...

Problem is it’s a different profile on the top compared to the other 3 sides.

this will be my door and draw if i get it to work.

Thanks Rick, there are a number of ways to make doors but i was hoping to keep it as a door.
Jason i don’t have that option. IF there is somewhere you can do that, that’s what I’m looking for.

I need to make door and draws with an odd edge profile. As you can't take MDF doors to the part editor, I use slab doors and edge in part editor. Problem is the edge banding. Is there a way to not show banding on slab doors (tried banding stock 0mm but still shows) or make it clear so you can't see ...

ok reinstalled with V5 and bingo thanks

Thanks will give that a try and let you know how it goes.

ok just swapped to another computer and installed ecab on it (using my V4.0 disk) then installed the new update (V5.2 build 2) and now getting the error.

System

Windows XP Profesional x64 SP2

Steve from \"the land down under\". I would say that if the bench tops are granit and all the panels are solid timber, in Sydney you would be looking in the $20,000 Australian range.