Thermwood / eCabinet Systems

we have noticed that there are a few new label formats and some of them include a "symbol" which seems to be pulled from the C:\Rolling Nest\Labels\Symbols library.

whilst they seem uncannily similar to Egyptian heiroglyphics, they must serve some purpose.
What are the symbols there for?
do I ...

When we scan a recut part, it loads into the load screen 25.4 times greater than the original cut size. Obviously a metric hiccup.

For example, if I cut a part which is 100mmx100mm and then decide to uise the recut barcode and scan in the part, the part ends up becoming 2540mm x 2540mm.

Could we ...

Does anyone else have this problem?

We cut for a variety of poeple, but only have a 5 station (tool holder) machine. We do have a lot of different tools and tooling requirements to cater for customers needs.

Obvioulsy although the tools are set up and available in the tool manager and in the ...

Tim
I have a Thermwood and we are cutting using v6.3

The only real issue that we have experienced in the twd file transfer from the eCabinets to the Controller is with drawer boxes which have dados. The dado and tenon size sent to the machine does not match. We have to cut the tenons down on a ...

Nearly all other routers / software controllers on the market compensate for this pheonomenun by using what is called lead in. This is a technique where the tool enters into the edge of the part in an arc motion from a distance of approx 1mm away from the perimeter of the part (that means that the ...

we have purchased a thermwood cnc flatbed router and recently spent $70k upgrading to the latest control system etc.

we manufacture benchtops predominantly (on a point to point) but intend to use our thermwood specifically to supply cut to size parts for cabinet makers.

whilst we are just ...

Double Pass Parts not getting second pass when “Scrap Part Recovery” has been selected.

Only the first pass outline (to the depth of the opnio skin) is being written into the CNC Code.

Labelling broken when using “Scrap Part Recovery” – We have designed our own labels which work beautifully in normal use. As soon as we select the “Scrap Part Recovery” option, we note that the labels have the following problems:
a. The edge banding graphic disappears
b. The length and width is ...