searching for vendor

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Post Reply
Henry McElvery
New Member
Posts: 1
Joined: Fri, Jul 15 2005, 10:20AM

searching for vendor

Post by Henry McElvery »

I am searching for a vendor interested in machining disks for a commercial mobile project. The disks are constructed of 1/4\" architectural plywood with different japenese characters cut out of each. See attachment for general idea.

Disks would be 8\", 12\", 16\" diameter with an aproximate quantity of 10 in each size.

What file type and information would be required to produce?

I would appreciate any feedback and budgetary pricing.

Thanks,
Henry McElvery
Attachments
HK Mobile mm HenryJPEG.jpg
HK Mobile mm HenryJPEG.jpg (86.71 KiB) Viewed 7652 times
Bill Rutherford
eCabinets Beta Tester
Posts: 386
Joined: Tue, May 10 2005, 5:23AM
Location: Lancaster, NH
Contact:

Post by Bill Rutherford »

Henry,
I would be happy to take a further look at the job and possibly provide a quote. Give me a call at 877-352-6466 and we can discuss it further.

Bill Rutherford
Michael Kowalczyk
eCabinets Beta Tester
Posts: 284
Joined: Tue, May 10 2005, 11:35AM
Location: Houston, Texas

Post by Michael Kowalczyk »

Henry,
I would be interested in your project also. I also have a laser that may be a better way to go. Would 3mm russian birch work for your material? or does it need to be 1/4\"? I have both but the 3mm is excellent to work with, is very strong and less expensive.
My office is 281-586-8830 ext 2
Michael
Grady Robertson
New Member
Posts: 13
Joined: Wed, May 18 2005, 7:31AM
Location: Lubbock, TX
Contact:

Post by Grady Robertson »

Henry,

We would also be interested in this project. We have a Thermwood CNC router, one CNC laser with a 4' X 8' table and one smaller laser. Check out our work at http://www.woodgraphix.com

Grady Robertson
806-535-8234
877-863-3935 Toll free
grady @ woodgraphix.com
David Hall
eCabinets Beta Tester
Posts: 593
Joined: Tue, May 17 2005, 12:41PM
Location: Stamford, CT USA
Contact:

Post by David Hall »

Me too!

(203) 653.2281
David Hall
Hall's Edge Inc.
eCabinets Machining Services
http://www.HallsEdge.com
Post Reply