searching for vendor

Henry McElvery · Post by **Henry McElvery** » Fri, Jul 15 2005, 11:26AM

I am searching for a vendor interested in machining disks for a commercial mobile project. The disks are constructed of 1/4\" architectural plywood with different japenese characters cut out of each. See attachment for general idea.

Disks would be 8\", 12\", 16\" diameter with an aproximate quantity of 10 in each size.

What file type and information would be required to produce?

I would appreciate any feedback and budgetary pricing.

Thanks,
Henry McElvery

Bill Rutherford · Post by **Bill Rutherford** » Fri, Jul 15 2005, 11:51AM

Henry,
I would be happy to take a further look at the job and possibly provide a quote. Give me a call at 877-352-6466 and we can discuss it further.

Bill Rutherford

Michael Kowalczyk · Post by **Michael Kowalczyk** » Fri, Jul 15 2005, 7:02PM

Henry,
I would be interested in your project also. I also have a laser that may be a better way to go. Would 3mm russian birch work for your material? or does it need to be 1/4\"? I have both but the 3mm is excellent to work with, is very strong and less expensive.
My office is 281-586-8830 ext 2
Michael

Grady Robertson · Post by **Grady Robertson** » Sat, Jul 16 2005, 8:57AM

Henry,

We would also be interested in this project. We have a Thermwood CNC router, one CNC laser with a 4' X 8' table and one smaller laser. Check out our work at http://www.woodgraphix.com

Grady Robertson
806-535-8234
877-863-3935 Toll free
grady @ woodgraphix.com

David Hall · Post by **David Hall** » Mon, Jul 18 2005, 8:42AM

Me too!

(203) 653.2281

Thermwood / eCabinet Systems

searching for vendor

searching for vendor