Blind Corner Frameless Base Cabinet

[Brent Brown]

Hi guys.
How are you making your blind corner cabs in e-cabs? I did it before, but now when I try to resize my old cabinet or one from the \"standard\" library I get an error like \"the dimension will result in an unstable cabinet\".

Thank you,

Brent Brown

[Michael Yeargain]

Brent,

For a blind Left or Right cabinet I use a 26 1/4\" left or right (respectively) stile of the sheet stock for a face frame. I inset the stile the same thickness of the cabinet material to account for the top and sides. This will allow you to place a door as well as stretch the cabinet without any problems.

The mouse curser is located on a 26 1/4\" left stile inset at the top and left side of this cabinet. I also had to inset the top, sides and deck the same thickness as the faceframe stock.

Hope this helps.

[George Davidson]

Hi Brent
This what I do I make up the face frame then I rout out the
blank side all the way around 3/8\"by 3/8\" and put 1/4\" plywood in it.
It makes our cabinet lighter We are a small shop
NO cnc router