It appears that when inserting cabinets in Custom Layout and using the Change Size option to define a custom size, the size of the Toe Kick is lost in the calculation.
If I place three different base cabinets in Custom Layout without changing their size they all insert at the correct height. That is they are all 35 1/2\" tall cabinets with a 5\" detached toe so the actual cabinet height is 30 1/2\" and while selecting the cabinets their height is listed as 30 1/2\". So far everything is okay. Now I change the width of one of these same cabinets while placing it (just the width, nothing else) and the OVERALL height of the cabinet changes to 30 1/2\" instead of the 35 1/2\" that it should be. It still inserts 5\" from the floor like it should and is listed as a 30 1/2\" cabinet as it should but the inserted cabinet is actually only 25 1/2\" tall.
Resize cabinet in Custom Layout
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
Rolf Bergstrom
- Senior Member
- Posts: 222
- Joined: Thu, May 19 2005, 2:12PM
- Location: Glendale, AZ
- Contact:
-
Walker T Scott
