cut this please

Nemanja Vujkovic · Post by **Nemanja Vujkovic** » Tue, May 29 2007, 3:05PM

cant get this to cut write...profile modeler chews on it for awhile then freezes up..

Joe Soto · Post by **Joe Soto** » Tue, May 29 2007, 4:07PM

Nemanja, the zip file is just a .jpeg
Joe

Roger Erismann · Post by **Roger Erismann** » Tue, May 29 2007, 8:11PM

Joe,

I will post the assembly tommorow...nemanja and I work together...

Nemanja Vujkovic · Post by **Nemanja Vujkovic** » Wed, May 30 2007, 9:17AM

Sorry, try this Joe.
Thanks!

Nemanja Vujkovic · Post by **Nemanja Vujkovic** » Wed, May 30 2007, 9:24AM

I do not think that .esa file is going to work, so here is one more try.

Joe Soto · Post by **Joe Soto** » Wed, May 30 2007, 9:39PM

I just got your files tonight, I will give it a shot in the morning.
Joe

Brian Shannon · Post by **Brian Shannon** » Thu, May 31 2007, 1:04AM

Nemanja,

I've had some very detailed mouldings in PM that I thought had frozen up but it was just taking a loooooooong time. Try it again and just leave it alone for 20 minutes or so. It's worth a shot.

Joe Soto · Post by **Joe Soto** » Thu, May 31 2007, 7:28AM

Brian is correct, to verify this I set the step over to a to .125 and it took a no time to verify the tool path or write the code. I'm sure this would not produce a good cut.
Joe

Nemanja Vujkovic · Post by **Nemanja Vujkovic** » Thu, May 31 2007, 9:48AM

I'm cutting it now. I left it for about 45 minutes and set my step to 0.001, because first time i cut it the step was 0.01 and the cut was far from good. I'll let you now hov it turns out!

Thanks for all your help!

Nemanja Vujkovic · Post by **Nemanja Vujkovic** » Thu, May 31 2007, 11:39AM

The part looks great, CNC gave me a litle trouble, but i think that eCabinets is the cause. There is some corupted files!