Cut List Error

Jolanda Slagmolen · Post by **Jolanda Slagmolen** » Wed, Jun 20 2007, 11:28AM

I'm designing a kitchen, and when I run a Cut List, it says I need in excess of 1 million sheets of one type of material, and negative several thousand of another type. Clearly there is something wrong. It's just affecting the material used for the body of the cabinets, not the drawers. I've discovered the cabinets that are creating the problem, and when I delete them I get a more reasonable-looking sheet stock summary. They are two glass-door cabinets. Also, when I take them to the Cabinet/Assembly Editor they have no backs on them, even though the Construction Settings have \"Has Back\" checked off and the material specified. What is causing this problem and how can I prevent it from re-occuring in other projects?

By the way, thanks to everyone who provided feedback on my countertop problem!

Jolanda

Walker T Scott · Post by **Walker T Scott** » Wed, Jun 20 2007, 11:44AM

Jolanda

Pleas attach an offending cabinet so we can take a look at it.
Thanks
walker

Jolanda Slagmolen · Post by **Jolanda Slagmolen** » Wed, Jun 20 2007, 12:32PM

Hi Walker

Here is the offending cabinet.

Thanks, Jolanda

Walker T Scott · Post by **Walker T Scott** » Wed, Jun 20 2007, 12:43PM

This issue has been fixed in 5.1.3; do a construction settings ok and this will bring the cabinets back back and fix the cut list.

Thanks
Walker

Jolanda Slagmolen · Post by **Jolanda Slagmolen** » Wed, Jun 20 2007, 1:36PM

Thanks!

Jolanda