Bug Report, Stretchers and drawer slide holes

Jim Lovejoy · Post by **Jim Lovejoy** » Fri, Jul 06 2007, 6:06PM

I have been having a problem with crashes. It seems to have to do with a stretcher and the holes associated with my drawer slides. As an example I submit this cabinet. The program crashes whenever I try to add a stretcher. up and down orientation, from the left end to the right end. If I build the cabinet with the stretcher first then the program crasheds when I try to add the drawer.

Can this be fixed?

Thanks,

Jim Lovejoy

Rick Palechuk · Post by **Rick Palechuk** » Fri, Jul 06 2007, 11:14PM

Hi Jim, are you trying to put the stretcher on the inside of the cab? If so then I think the stretcher is interfering with the drawers.

Rick Palechuk · Post by **Rick Palechuk** » Fri, Jul 06 2007, 11:29PM

There seems to be more to it than meets the eye.

Rick Palechuk · Post by **Rick Palechuk** » Sat, Jul 07 2007, 12:58AM

Well Jim I stripped that thing down, changed material, settings, name, construction parameters, PE cuts and it still shuts down

I'm at a loss with this one.

Jim Lovejoy · Post by **Jim Lovejoy** » Sat, Jul 07 2007, 7:27AM

I spent quite a bit of time trying to sort this out. That is why I think it is a bug of some kind. I isolated the problem to the drawer PE holes and the stretcher. I can have either but not both together. I checked the cabinet depth an although it is close there seems to be no direct conflict in dimensions.

Rick, Thanks for taking a look at this. Maybe the programmers can see where the crash occurs. It is not just a small conflict. It makes the system crash, Boom!

Jim Lovejoy

Walker T Scott · Post by **Walker T Scott** » Mon, Jul 09 2007, 6:38AM

Jim

This issue will be fixed in the next patch.

Walker