Blind corner cabs

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Gene Davis

Blind corner cabs

Post by Gene Davis »

I know how to do the workaround for getting a door to size and place where needed, but is there a way with eCabs to make my seed cab \"parametric,\" and resize as required based on a \"door run\" dimension?

My workaround for getting the door to process is to stick a partition where needed, made from a \"do not cut\" stock.

The door jamb is placed as a display panel.
Attachments
Frameless blind corner basecab.jpg
Frameless blind corner basecab.jpg (160.97 KiB) Viewed 1745 times
Top
Forrest Chapman
eCabinets Beta Tester
Posts: 1260
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:
Contact Forrest Chapman

Post by Forrest Chapman »

Gene,

Place the pilaster as a faceframe with a negative inset. Then place the door inset the thickness of your faceframe with the proper reveals. It should resize.

Forrest
Top
Post Reply

Return to “eCabinet Systems Software”