drawer boxes

Kent Holdeman · Post by **Kent Holdeman** » Fri, Nov 09 2007, 3:39PM

I just designed my first kitchen with pullout shelves behind doors. Then they went with different glides so needed to change the gap on both sides. Now when I take them back into the editor and try to select the drawer box it selects the whole opening. I cannot select the boxes to delete them and change the gaps. I tried to add more drawers in and it will let me do that but then I still cannot edit any of them. Think I'm going bald quick today!

Justin Melhiser · Post by **Justin Melhiser** » Fri, Nov 09 2007, 4:13PM

Kent
I will need the steps on how you built this cabinet. Please explain the design in great deatail. I want to be able to reproduce this cabinet exactly the same way you did.

Kent Holdeman · Post by **Kent Holdeman** » Fri, Nov 09 2007, 4:26PM

First of all it is a cabinet I have took out of standard cabinets and changed to our way of building and then saved as a seed cabinet. I can't remember what all the changes are, 1/4\" back, full dado on deck, back and fixed shelves. 1/2\" inset on back, 5/16\"gap on sides of drawers for undermounts. Then on this job my only changes have been door styles. Now I have the whole kitchen designed and looks like I'll have to replace every cabinet to get rid of them. One thing I have done which is probably kind of stupid is we changed the way we built our drawer boxes a while back. Put 1/2\" ply on front of box instead of 3/4\". Instead of making another box with another name and more confusion I edited the box and saved it under the same name. This cabinet had the old drawer box in it with the same name. Maybe this caused a problem.

Walker T Scott · Post by **Walker T Scott** » Mon, Nov 12 2007, 12:32PM

The left stile out side scribe is what’s causing the problem. If you remove it you should be able to select the drawer box. Also I noticed when looking at your drawer box in the drawer box editor all the material for each part were all blank in the construction settings. You will need to change them back to what you want and resave the drawer box. I am still trying to reproduce that one but I have passed on your original issue to the programmers and will let you know when this is fixed.

Thanks
Walker

Kent Holdeman · Post by **Kent Holdeman** » Wed, Nov 14 2007, 10:22AM

I ended up deleting that cabinet and putting another one in there before your answer but after doing that to a couple of them the others quit giving me that problem. Thanks for your help.

Walker T Scott · Post by **Walker T Scott** » Wed, Nov 14 2007, 11:24AM

The issue with being unable to select the drawer box has been fixed for 5.2.
Thanks
Walker