Can not generate cost reports

ScotAcree · Post by **ScotAcree** » Wed, Oct 29 2008, 8:48AM

Could someone try to open this job and run a cost report?Mine shuts down when it gets to calculating sheet goods.

Scot

Justin Melhiser · Post by **Justin Melhiser** » Wed, Oct 29 2008, 2:06PM

Scott
I am looking at your file now and will let you know.

ScotAcree · Post by **ScotAcree** » Wed, Oct 29 2008, 2:56PM

Justin,

Let me know if you need more info.

Scot

Justin Melhiser · Post by **Justin Melhiser** » Thu, Oct 30 2008, 8:22AM

Scot
There is a cabinet that you can not see in your room. See image below. You should be able to click where this cabinet is and delete it. If you need it in there then change the sheet stock in the room, just select the same material for each one. This will reginerate all the cabinets and the hidden cabinet will now be in view. This will allow you to create your cost sheet.

ScotAcree · Post by **ScotAcree** » Thu, Oct 30 2008, 9:11AM

Justin,

Works like a charm,thank you for finding this.Lesson learned.
Great service Thermwood Team.

Scot Acree Woodworking,LLC

Thermwood / eCabinet Systems

Can not generate cost reports

Can not generate cost reports

Re: Can not generate cost reports

Re: Can not generate cost reports

Re: Can not generate cost reports

Re: Can not generate cost reports