I'm having problems with corner cabinets door handles. I put in the slab double right door on, select handle and place. Handle is "floating" inside of cabinet. Any ideas?
Thanks,
Fred
Corner Cabinet Door Handles
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
FredHirsch
- Senior Member
- Posts: 167
- Joined: Tue, Oct 03 2006, 6:51PM
- Location: Phoenix, AZ
- Contact:
Corner Cabinet Door Handles
- Attachments
-
- Floating Handle in corner cabinet
- floating_handle.jpg (60.45 KiB) Viewed 6278 times
Fred Hirsch
-
JohnLashuay
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Corner Cabinet Door Handles
Fred,
Can you post the hsf file?
Can you post the hsf file?
-
FredHirsch
- Senior Member
- Posts: 167
- Joined: Tue, Oct 03 2006, 6:51PM
- Location: Phoenix, AZ
- Contact:
Re: Corner Cabinet Door Handles
John,
Here is the HSF. I just took the Standard Corner Frameless unmodified, applied doors and placed handles.
Thanks for helping me out with this.
Fred
Here is the HSF. I just took the Standard Corner Frameless unmodified, applied doors and placed handles.
Thanks for helping me out with this.
Fred
- Attachments
-
- Corner Floating Handle.hsf
- corner floating handles
- (552.02 KiB) Downloaded 488 times
Fred Hirsch
-
JohnLashuay
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Corner Cabinet Door Handles
Fred,
I tried the standard frameless corner cabinet and got the same results. I then went to my own library and brought in the attached corner cabinet and for some reason it placed the pull in the right spot. I don't know what the problem is, but it looks like someone smarter than me should look at the corner cabinet from the standard library and see what is happening.
I didn't make this corner cabinet identical to what you were doing, but it may help.
-John
I tried the standard frameless corner cabinet and got the same results. I then went to my own library and brought in the attached corner cabinet and for some reason it placed the pull in the right spot. I don't know what the problem is, but it looks like someone smarter than me should look at the corner cabinet from the standard library and see what is happening.
I didn't make this corner cabinet identical to what you were doing, but it may help.
-John
- Attachments
-
- base_corner_angle_24x34.5.jpg (10.62 KiB) Viewed 6322 times
-
- base_corner_angle_24x34.5.hsf
- (474.02 KiB) Downloaded 457 times
-
FredHirsch
- Senior Member
- Posts: 167
- Joined: Tue, Oct 03 2006, 6:51PM
- Location: Phoenix, AZ
- Contact:
Re: Corner Cabinet Door Handles
John,
Thank you very much. We use eCabs all the time but very rarely for presentation. So, to be honest with you I've never put pulls on the cabinets
So.... this could have been a corrupted cabinet all along that I've been using throughout my jobs.
Thanks again,
Fred
Thank you very much. We use eCabs all the time but very rarely for presentation. So, to be honest with you I've never put pulls on the cabinets
So.... this could have been a corrupted cabinet all along that I've been using throughout my jobs.Thanks again,
Fred
Fred Hirsch
-
JohnLashuay
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Corner Cabinet Door Handles
Fred,
My corner cabinet that I pulled from the "Standard Cabinets" library seems to be just like yours. I'm sure, but there seems to be something corrupted in it. The cabinet that I posted was one that came with the library we purchased from Kerry Fullington back when we first started out. So I don't think that it is just your cabinet that is corrupted.
-John
My corner cabinet that I pulled from the "Standard Cabinets" library seems to be just like yours. I'm sure, but there seems to be something corrupted in it. The cabinet that I posted was one that came with the library we purchased from Kerry Fullington back when we first started out. So I don't think that it is just your cabinet that is corrupted.
-John
-
Al dedenus
- Guru Member
- Posts: 269
- Joined: Sun, Apr 29 2007, 8:53PM
- Company Name: Creative Kitchens and Interior
- Country: NEW ZEALAND
- Location: Tauranga New Zealand
Re: Corner Cabinet Door Handles
I have the same problem with corner cabinets.Have ended up manually adding the handles in the CE