I started using favorites in control nesting yesterday to store programs I use every day however when I went to use them today I noticed after shutting down overnight and starting up the machine the next day they are not saved, is this normal?
CS45-510 Supercontrol V 7.1.0.7 Control nesting V 5.47
Favorites in Super Control ?
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- Senior Member
- Posts: 179
- Joined: Thu, Oct 11 2007, 7:33PM
- Company Name: Penn Laminates
- Country: UNITED STATES
- Location: Trafford PA
- Contact:
-
- eCabinets Beta Tester
- Posts: 1122
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Re: Favorites in Super Control ?
It's certainly normal for us, Terry. The Favorites list has never retained anything we put in it. Would be nice if it worked though, at least so we could have an easier way to get to the flycut program.
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Favorites in Super Control ?
Gentlemen,
Could you please do a test for me. Close the SuperControl software, then open Windows Explorer at the SuperControl and go to the c:\system directory. In this directory, find the file "THMFavorites.fav", Right-Click on it and select <Properties> from the menu. Now, on the properties dialog -> General tab, check and see if the Attributes is set to "Read-only". If it is, un-check this and then select OK. Restart the SuperControl and try to save a few favorite, then close the SuperControl and restart (see if favorites still exist). If they still do not, go back and see if the "THMFavorites.fav" file is set back to read only. By default this file should not be set to read-only. I will investigate further into this to ensure that it does not get this attribute from the factory.
Could you please do a test for me. Close the SuperControl software, then open Windows Explorer at the SuperControl and go to the c:\system directory. In this directory, find the file "THMFavorites.fav", Right-Click on it and select <Properties> from the menu. Now, on the properties dialog -> General tab, check and see if the Attributes is set to "Read-only". If it is, un-check this and then select OK. Restart the SuperControl and try to save a few favorite, then close the SuperControl and restart (see if favorites still exist). If they still do not, go back and see if the "THMFavorites.fav" file is set back to read only. By default this file should not be set to read-only. I will investigate further into this to ensure that it does not get this attribute from the factory.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Senior Member
- Posts: 179
- Joined: Thu, Oct 11 2007, 7:33PM
- Company Name: Penn Laminates
- Country: UNITED STATES
- Location: Trafford PA
- Contact:
Re: Favorites in Super Control ?
I went in and looked at those properties and neither one was checked but now the favorites for some reason seem to be retained!
-
- eCabinets Beta Tester
- Posts: 1122
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Re: Favorites in Super Control ?
I'm not near the machine at present Scott, but I will let you know what I find out when I get there.
Thanks!
Thanks!
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- Guru Member
- Posts: 367
- Joined: Thu, May 19 2005, 7:50PM
- Company Name: Fancyridge Wood Products LLC
- Location: Greensburg, Ky
Re: Favorites in Super Control ?
Try to back up the favorites then restore.
Joe
Joe