A different toekick question

[Leo Graywacz]

The side cutout that is done when you use the toekick function, is it adjustable? I end up having the face frame hang below the cutout. I need the deck to either be flush or 1/16" below the topside of the bottom rail. and the toekick cutout to be flush with the bottom of the lower rail.


Not like this where the FF is hanging below the cutout. How do I make it flush?

[David Egnoski]

Leo,

Set the bottom inset for the deck to the distance the face frame extends below the notch.

deck.jpg (39.93 KiB) Viewed 3243 times

[Kerry Fullington]

Leo,

I calculate the deck inset by
width of bottom rail minus thickness of deck material equals Deck Bottom Inset

Kerry

[Leo Graywacz]

I'll try that Dave, I'd been playing with the toekick settings, not the deck settings. They sure can make it difficult sometimes. Thanks.