It would be like the attached cabinet, except that the left side would be 52.5" tall, and the right side 62.75" tall.
I'm not sure how to get this to work out for the top face frames.
- Short Pantry.jpg (8.09 KiB) Viewed 2759 times
Cabinet with sloping top and face frames
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
Rob Babcock
- Junior Member
- Posts: 33
- Joined: Wed, Jun 21 2006, 4:51PM
Cabinet with sloping top and face frames
I would like to create a pantry cabinet that will fit under some stairs.
It would be like the attached cabinet, except that the left side would be 52.5" tall, and the right side 62.75" tall.
I'm not sure how to get this to work out for the top face frames.
It would be like the attached cabinet, except that the left side would be 52.5" tall, and the right side 62.75" tall.
I'm not sure how to get this to work out for the top face frames.
-
Kerry Fullington
- Wizard Member
- Posts: 4763
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Cabinet with sloping top and face frames
Rob,
This isn't perfect but you can look at the construction settings and see what I did. This requires some Part Editor work. I made the top rail wide so that you wouldn't have to make a door that follows the slope.
This isn't perfect but you can look at the construction settings and see what I did. This requires some Part Editor work. I made the top rail wide so that you wouldn't have to make a door that follows the slope.
- pantry.jpg (86.06 KiB) Viewed 2697 times
- Attachments
-
- Short Pantry_edit.hsf
- (240.02 KiB) Downloaded 355 times
