Create Part From Closed Contour

Georgi Baltov · Post by **Georgi Baltov** » Thu, May 13 2010, 8:49AM

Hi Guys,

if it's not a big problem can you test the dxf that I have attached and see if you can create a part in any material. I can create a pocket from the part but can't cut out the part itself. It's getting kind of frustrating.

Let me know what you find. Thank you

Georgi Baltov · Post by **Georgi Baltov** » Thu, May 13 2010, 9:09AM

Never mind. It seems there was something wrong with the file because I imported it from Mastercam. Sensitive eCabinets. I redrew it in Autocad and it worked.

Thank you.

Thermwood / eCabinet Systems

Create Part From Closed Contour

Create Part From Closed Contour

Re: Create Part From Closed Contour