Faceframe thickness problems

[Donald Thomson]

I've attached a room layout zoom-in picture of a corner base cabinet adjoining a standard base cabinet. As you notice in the picture the faceframe depictions are different thicknesses even though both cabinets are set to have 3/4" thick faceframes.

This is happening with two different corner cabinets in the same layout.

Any thoughts?

[Kerry Fullington]

Don,

Post your corner cabinet.

Kerry

[Donald Thomson]

Here you go Kerry.

[Rick Palechuk]

Don, in Define Materials, your hickory stock is set at 15/16".

[Kerry Fullington]

Thanks Rick,

That is what I wanted to check.

Kerry

[Donald Thomson]

That's very interesting. I set all my faceframes to 3/4" thickness. I wonder how this one changed to 15/16" thickness. I've also had PE cuts put into cabinets that I didn't do.

Kerry, do you remember the problems I was having resizing a cabinet? Somehoe PE cuts were put in that cabinet and I had never taken it to the PE to do that. I selected the entire cabinet, removed the PE cuts and resizing worked fine.

Yesterday I went to exit eCabs after a long editing session and during the saving process you get a dialog saying how many objects are being saved. Somehow this job jumped from about 900,000 objects from the previous save up to 3,200,000 objects.

Strange behavior......Random