last 2 batches i did looked clean...but wtf!!Rabbeting
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
MarcoKnjaschewitsch
- Junior Member
- Posts: 73
- Joined: Fri, Jan 26 2007, 1:44AM
Rabbeting
So my newest Delema...Random cabinets that have been changed in batch show no tenons at the CNC. Is someone else having this problem?? First i had thickness issues with tenons on drawers which is now gone with build 4...but now this last 2 batches i did looked clean...but wtf!!
last 2 batches i did looked clean...but wtf!!-
Scott G Vaal
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Rabbeting
Marco,
We will need to know more info to help you here. Can you post the job that had the issue? Also, we may need an export from Control Nesting at the machine. If you have not done this before: Load Control nesting, Load the job you are experiencing trouble with, Perform a nest, Then press the Export button on the main Control nest screen. This will create a .cab file that you can send to us.
We will need to know more info to help you here. Can you post the job that had the issue? Also, we may need an export from Control Nesting at the machine. If you have not done this before: Load Control nesting, Load the job you are experiencing trouble with, Perform a nest, Then press the Export button on the main Control nest screen. This will create a .cab file that you can send to us.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
