Hi,
We have noticed that when our machine is trimming up an off-fall, the cutter is cutting into any parts beside the off-fall. It is cutting into the part by around 2-3mm. This spells a big problem when machining doors. Logic would suggest that I have the tool dimention set wrong but I have double checked all this and its set correct. It appears to be a programming error on control nests behalf. Has this happened to anyone else? Am I missing something?
Dale
Off-fall trimming problem
Moderators: Mike Iubelt, Jason Susnjara, Larry Epplin, Clint Buechlein, Mike Iubelt, Jason Susnjara, Larry Epplin, Clint Buechlein
-
Dale Wills
- Senior Member
- Posts: 190
- Joined: Mon, Oct 10 2005, 11:09PM
- Company Name: none
- Country: AUSTRALIA
- Location: Camperdown, Victoria, Australia
-
Ryan Hochgesang
Re: Off-fall trimming problem
Hi Dale,
If you could please, send the following files to: program@thermwood.com so that we can review:
- EXPORT from Control Nesting (Button at lower right of C.N. Screen, first next job prior to selecting)
- Actual CNC code you've run and seen issue occur with
- Cabinet/Part design file (.hsf, .esa, etc...)
Thanks!
If you could please, send the following files to: program@thermwood.com so that we can review:
- EXPORT from Control Nesting (Button at lower right of C.N. Screen, first next job prior to selecting)
- Actual CNC code you've run and seen issue occur with
- Cabinet/Part design file (.hsf, .esa, etc...)
Thanks!
-
Daniel Vonderheide
- Thermwood Team
- Posts: 361
- Joined: Wed, May 17 2006, 11:25AM
- Location: Thermwood
Re: Off-fall trimming problem
This issue has been verified and is currently being worked on. Hopefully we will have an answer soon for you. Thank you for your patience.
