Drawers Losing PE Cuts on Cabinet Resize
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
Nat Wheatley
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Drawers Losing PE Cuts on Cabinet Resize
-Reduce width of attached cabinet by several inches. PE cuts disappear.
- Attachments
-
- 3mm_Base_Std_Pair.hsf
- (1.44 MiB) Downloaded 333 times
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
-
Scott G Vaal
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Drawers Losing PE Cuts on Cabinet Resize
Nat,
The drawer box bottom and back does not have any constraints set. This is why the cuts are going away when you reduce the width by several inches. Now, with that said, I see that your default box seems to have constraints set. So, I went and removed the box and added it back in and it then seems to be OK. Any Ideas as to the steps you took to get it in this state?? Or is there more to the story than what I am seeing here?
The drawer box bottom and back does not have any constraints set. This is why the cuts are going away when you reduce the width by several inches. Now, with that said, I see that your default box seems to have constraints set. So, I went and removed the box and added it back in and it then seems to be OK. Any Ideas as to the steps you took to get it in this state?? Or is there more to the story than what I am seeing here?
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
Nat Wheatley
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Re: Drawers Losing PE Cuts on Cabinet Resize
Thanks Scott. The constraints were there at one point, I'm not sure at what point they disappeared.
Nat
Nat
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
