Heres my issues:
1) I create a batch of cabinets with doors/drawer fronts and drawer boxes. After I click CNC. Random drawer cabinets with dbx's have been deleted from my batch. Upper cabinets are fine.
2) I create a batch with cabinet and dbx (no drawer front). Cabinet has no back either. The dbx should be 20" deep. All is good before CNCing. Click CNC. All the dbx's have been inset 3/4" from the back. Dbx is now 19.25" deep. Its like ecabinets decided to add the 3/4" back just for the hell of it.
I had the entire batch of 25 dbx's supposed to be 20"deep, now all 19.25" deep. All garbage.
![Frustrated :wall:](./images/smilies/pictowallsmall.gif)
![Frustrated :wall:](./images/smilies/pictowallsmall.gif)
![Frustrated :wall:](./images/smilies/pictowallsmall.gif)
![Flaming :fire:](./images/smilies/pictofiresmall.gif)
![Flaming :fire:](./images/smilies/pictofiresmall.gif)
![Flaming :fire:](./images/smilies/pictofiresmall.gif)
3) I make all my cabinets tenon and dado. The other day I had 2 base cabinets with tenon on the back panel (left and right), but no dado to accept them in the left and right side panels. I re check my cabinet in the batch. Its fine.
So F..ing frustrating
The guys in the shop look at me like Im a f..ing idiot. My boss looks at me with frustration.
My hands are up. I give up. Do I have to re-check every cabinet after I hit CNC now??? Thats a time/production issue
![Frustrated :wall:](./images/smilies/pictowallsmall.gif)