HOOPS error - can't open job file

David Yurk · Post by **David Yurk** » Thu, Oct 18 2012, 4:59PM

OK, I could use some suggestions. Have a nearly completed job file that I'm scheduled to show the customer tomorrow. When I try to open the job file I get a HOOPS error message and get returned to the eCab home page. Things I have tried: computer restart, renamed job file, reinstalled v6.8 in repair mode, and updated graphics driver. No change. Other jobs open fine. Welcoming any suggestions before I make another pot of strong coffee. Thanks all.

Rick Deskins · Post by **Rick Deskins** » Thu, Oct 18 2012, 7:41PM

Can you zip the job and post it?

David Yurk · Post by **David Yurk** » Thu, Oct 18 2012, 8:56PM

Will post file. Could take a while. Slow internet.

David Yurk · Post by **David Yurk** » Thu, Oct 18 2012, 9:26PM

Can't post job. Don't have broadband and the upload times out before it's done.

Dennis Englert · Post by **Dennis Englert** » Mon, Oct 22 2012, 9:03AM

David,
Attach the file to an email and send to cabinets@thermwood.com. We can forward it to Rick if you can get the file to come across.

If you can not get this to go from your internet connection you might try the local library.

Dennis

Thermwood / eCabinet Systems

HOOPS error - can't open job file

HOOPS error - can't open job file

Re: HOOPS error - can't open job file

Re: HOOPS error - can't open job file

Re: HOOPS error - can't open job file

Re: HOOPS error - can't open job file