Desiging Island Range hoods in ecabinet

DennisMeurer · Post by **DennisMeurer** » Mon, May 21 2007, 2:18PM

Was just curious if any one has designed a Island range hood and how it was done

Paul Ellis · Post by **Paul Ellis** » Mon, May 21 2007, 2:28PM

Dennis,
Welcome to the forum. You can do a search for 'range AND hood' and get lots of references. Have a look at this one by George Davidson
http://ntc.thermwood.com/forums/viewtop ... d#img_1868

I am sure George will be glad to help get you on your way in designing one!
Good luck

Al Navas · Post by **Al Navas** » Mon, May 21 2007, 2:35PM

Just a quick fix on the URL, Paul:

Enjoy!

.

Michael Yeargain · Post by **Michael Yeargain** » Mon, May 21 2007, 4:48PM

You can also export the file as an HSF and import it into the display part editor and save that as an STL file. With the STL file you can import that into your custom layout and resize as needed.

This will work if you don't plan to do a cut list from the display. If you plan to cut the part then save the new hood as an assembly.

Lamar Horton · Post by **Lamar Horton** » Mon, May 21 2007, 5:28PM

Here is one I did recently. It is some drawer fronts and display panels.

George Davidson · Post by **George Davidson** » Mon, May 21 2007, 8:52PM

Hi Dennis
Here is a 30\" and a 36\" Inland hood that you can play with I would keep it
in assemblies (It has alot of parts)