Lumicor

Rick Palechuk · Post by **Rick Palechuk** » Thu, Aug 02 2007, 11:29PM

Anyone have any tips on working with Lumicor? Cutting it is not a problem, it's the fabrication that is. We need to apply it to HPL. The architect has spec'ed 1/4\" Lumicor to be applied over plastic laminate as a decorative feature. The edges need to be bonded together to form corners and the material needs to fastened to the PL in a way not to distort the clarity of the product.

DanEpps · Post by **DanEpps** » Fri, Aug 03 2007, 6:26AM

Rick

According to the Lumicor website, you can use normal router bits, etc for working with it.

Rick Palechuk · Post by **Rick Palechuk** » Fri, Aug 03 2007, 7:02AM

Thank you Dan. Cuttings not the issue, it's sticking it to the PL that is.

DanEpps · Post by **DanEpps** » Fri, Aug 03 2007, 7:22AM

The same site has binding info as well.

Rick Palechuk · Post by **Rick Palechuk** » Fri, Aug 03 2007, 7:31AM

Thanks Dan