Beginners Question, Cabinet Lists

skip fritz · Post by **skip fritz** » Tue, Sep 11 2007, 9:05AM

Will ECabinet generate a list of cabinets used in a layout , on the layout ?(without me having to type it in as text)

Also Wiil E Cabinet geneate a list of what the cabinets are,when they are aytomatically numbered?

Skip

Justin Melhiser · Post by **Justin Melhiser** » Tue, Sep 11 2007, 9:35AM

Skip

eCabinets will generate a cut list that will have the cabinets listed as (Cabinet No.1) directory/name of cabinet, then the size 41\"H X 52\"W X 18\"D, then tell if it is a (Base) or (upper). If you have any more questions feel free to email me or call me at 1-877-8804638 ext 227.

Thank You
Justin

Michael Yeargain · Post by **Michael Yeargain** » Tue, Sep 11 2007, 11:10AM

Skip,

This may be complicated at first. But, here's how I do this.

After I generate my cabinet drawings I produce a cut list and export it to excel. (Free Open office will open this as well)

Next go to the sheet component listing and sort the end panels or something you know is on every cabinet. For example in the picture I knew every cabinet had a left end so sort the left ends and this will list the cabinets.

Now look in colum \"h\" or the 8th colum highlight the first and pull down to the last so the colum is highlighted as shown. Next select copy from the right click menu or ctr \"C\"

Then go back to the LDE and select the text button and right click on the screen and select paste...

Michael Yeargain · Post by **Michael Yeargain** » Tue, Sep 11 2007, 11:11AM

e_cabinet ststems will then start typing in the copied text..

Thermwood / eCabinet Systems

Beginners Question, Cabinet Lists

Beginners Question, Cabinet Lists