Wall editing
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 57
- Joined: Wed, Nov 01 2006, 6:33PM
- Location: Faribault MN
- Contact:
Wall editing
I had to change a wall dimension U-shaped room, by adding 1/2". It was the wall between the other two walls, and now it shows that one side is overlapping the other wall by 1/4".When I go to detail room, itshows that the wall is 148 1/2". But when I go to the LDE the most I can get is 148 1/4".When I zoom in on the finished view, you can see it also.Any help would be appreciated.
Re: Wall editing
Lee
Please post your job file here or email it to me. My email is cabinets@ecabinetsystems.com
Please post your job file here or email it to me. My email is cabinets@ecabinetsystems.com
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Wall editing
Make sure you have all of the connecting walls selected before resizing the center wall. See Working with a Custom Layout -> Adjusting walls in the Wall Editor in "eCabinet Systems Made Easy" on the help menu for details.
Re: Wall editing
Lee
I just wanted to check and make sure everything was correct and working properly. If you have any other questions or need to email me any other files, please do so.
I just wanted to check and make sure everything was correct and working properly. If you have any other questions or need to email me any other files, please do so.
-
- Junior Member
- Posts: 57
- Joined: Wed, Nov 01 2006, 6:33PM
- Location: Faribault MN
- Contact:
Re: Wall editing
Thanks for the help. That's what I did wrong, I didn't make sure the connecting walls were highlighted. Seems like every problem I encounter usually falls into operator error.
-
- eCabinets Beta Tester
- Posts: 1740
- Joined: Tue, May 17 2005, 8:33PM
- Company Name: Timeless Cabinetry and Mantles
- Location: South East
Re: Wall editing
Lee Gernandt wrote:Thanks for the help. That's what I did wrong, I didn't make sure the connecting walls were highlighted. Seems like every problem I encounter usually falls into operator error.
To error is to be Human?
Intel Core i7-5820K (6-Cores, 3.3GHz, 15MB Cache)
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650