Sloped Counter

Nat Wheatley · Post by **Nat Wheatley** » Fri, Jan 08 2010, 7:22PM

On cabinet with a sloped top, is there a way to have the counter follow the slope? I've attached a screenshot of what I came up with, using the Countertop Editor. Sorry for the extremely basic drawing, I rarely use this area of the software (or the Countertop Editor...) Thanks.

: A.PNG (127.89 KiB) Viewed 8463 times

Kerry Fullington · Post by **Kerry Fullington** » Fri, Jan 08 2010, 7:56PM

Nat,

Instead of using the countertop editor to place your top, create a top using a display cube and associate it to the cabinet in the cabinet editor.

Kerry

Nat Wheatley · Post by **Nat Wheatley** » Fri, Jan 08 2010, 8:02PM

Thanks Kerry, I'll give that a try. (No doubt more questions to follow...) -Nat

Nat Wheatley · Post by **Nat Wheatley** » Fri, Jan 08 2010, 8:33PM

I may not be going about this right, but I brought the display cube and cabinet together into the Cabinet Editor. The screenshot shows as far as I was able to get. My plan was to use the 'Align Items' feature. I was able to select a node on the display cube, but not on the cabinet (trying for the upper corner), for some reason. Not sure why.

: A.PNG (91.65 KiB) Viewed 8405 times

Kerry Fullington · Post by **Kerry Fullington** » Fri, Jan 08 2010, 8:37PM

Nat,

Double click the cabinet to select it and the align tool will work. The cabinet will have a green outline not a hatch pattern. It looks like you have just selected an end.

Kerry

Nat Wheatley · Post by **Nat Wheatley** » Fri, Jan 08 2010, 8:45PM

Thanks Kerry, that did it. -Nat

Kerry Fullington · Post by **Kerry Fullington** » Fri, Jan 08 2010, 8:58PM

Nat,

Be careful playing with the 3D stuff, it can be addicting.

: game_room.jpg (307.35 KiB) Viewed 8399 times

Nat Wheatley · Post by **Nat Wheatley** » Fri, Jan 08 2010, 9:18PM

Extremely nice work Kerry. I'm continually amazed by what you're able to do with the software

In stark, stark contrast here's where I'm at:

: A.PNG (85.74 KiB) Viewed 8397 times

Looks like there's still quite a bit to learn! Thanks again for the help.

Gary Campbell · Post by **Gary Campbell** » Sat, Jan 09 2010, 4:54PM

Kerry...
You are a sick individual.

Teasing me that way! Can my and my little CNC come live with you for the winter?

Kerry Fullington · Post by **Kerry Fullington** » Sat, Jan 09 2010, 8:44PM

Gary,

Since you are in Florida maybe I should come see you.
7 degrees here this morning.

Kerry

Gary Campbell · Post by **Gary Campbell** » Sat, Jan 09 2010, 8:50PM

Kerry...
It is terribly cold here also. The worst and longest cold snap I have seen in 10 years. 41 degrees and a 30 kt sideways rain. I have never seen it that cold either. I wanted to visit you because I thought you had a fireplace!

Kerry Fullington · Post by **Kerry Fullington** » Sun, Jan 10 2010, 10:04AM

Gary,

We have a house in Colorado that has a fireplace. Maybe we should all forget about work and just go there for the winter.

Kerry

Thermwood / eCabinet Systems

Sloped Counter

Sloped Counter

Re: Sloped Counter

Re: Sloped Counter

Re: Sloped Counter

Re: Sloped Counter

Re: Sloped Counter

Re: Sloped Counter

Re: Sloped Counter

Re: Sloped Counter

Re: Sloped Counter

Re: Sloped Counter

Re: Sloped Counter