Search found 443 matches
- Tue, May 07 2024, 9:11PM
- Forum: eCabinet Systems Software
- Topic: Dificult to Part edit
- Replies: 0
- Views: 308
Dificult to Part edit
Sometimes I waste hours in the part editor trying to get something stable. Take for instance the attached part. I spent about 3 hours tweaking and designing some corner floor doors that are 13mm thick. I needed to put a plug on the back so I could use Bifold corner hinges. 3 hours seems pretty fair ...
- Fri, Apr 26 2024, 8:26PM
- Forum: eCabinet Systems Software
- Topic: eCabinets 6.2.11.1 update
- Replies: 10
- Views: 891
Re: eCabinets 6.2.11.1 update
Hi Ingbert.
If you have a chance, could you try and create the error I am getting on your machine.
Thanks
Mark.
If you have a chance, could you try and create the error I am getting on your machine.
Thanks
Mark.
- Thu, Apr 25 2024, 11:27AM
- Forum: eCabinet Systems Software
- Topic: eCabinets 6.2.11.1 update
- Replies: 10
- Views: 891
Re: eCabinets 6.2.11.1 update
Hi Clint. Thats a good idea to change all the doors in the directories. Deleting my door files was as far as I had gone so far. My graphic driver is the latest and all up to date. Ive played around with the forced rendering and double buffering but it doesn't change things. Can anyone else reproduce...
- Wed, Apr 24 2024, 4:27AM
- Forum: eCabinet Systems Software
- Topic: eCabinets 6.2.11.1 update
- Replies: 10
- Views: 891
Re: eCabinets 6.2.11.1 update
PS to the above, I,m not sure but I think If you use global modification to change the doors the edging hangs around in the background.
Mark
Mark
- Wed, Apr 24 2024, 4:20AM
- Forum: eCabinet Systems Software
- Topic: eCabinets 6.2.11.1 update
- Replies: 10
- Views: 891
Re: eCabinets 6.2.11.1 update
Hi Clint and Ingbert. Clint, I know you are not allowed to read novels at work but I wrote a lengthy assessment of the problem here. :lol: https://www.thermwood.com/forums/viewtopic.php?p=82890#p82890 Fortunately I think the time I put in trying to find this nasty little sucker may have paid off. Re...
- Mon, Apr 22 2024, 7:46AM
- Forum: eCabinet Systems Software
- Topic: ERROR: Edge Banding Has Wrong Body
- Replies: 7
- Views: 2919
Re: ERROR: Edge Banding Has Wrong Body
Hi ForrestQuestion to Mark after that last post. What kinduv coffee you guys got over there?
Ha Ha
Its the quantity.
If thats what 4 cups looks like, wait until you see 6.... :
- Mon, Apr 22 2024, 7:36AM
- Forum: eCabinet Systems Software
- Topic: Feature request
- Replies: 1
- Views: 673
Re: Feature request
Thats a +1 from me.
-----------------------------------------------------------------------------------------------
But seriously Forrest, Do you really need all those cabinets?
Just make those librarys smaller and you wont have to scroll as much.
-----------------------------------------------------------------------------------------------
But seriously Forrest, Do you really need all those cabinets?
Just make those librarys smaller and you wont have to scroll as much.
- Sun, Apr 14 2024, 9:23AM
- Forum: eCabinet Systems Software
- Topic: ERROR: Edge Banding Has Wrong Body
- Replies: 7
- Views: 2919
Re: ERROR: Edge Banding Has Wrong Body
Hi Guys. I have been unable to work out what is going on with this problem and its such a distraction. Is it just me or are other users seeing the same things? Would it make any sense to delete all materials and recreate them as units are re-selected? I don't particularly want to redo all our units ...
- Tue, Apr 02 2024, 7:29PM
- Forum: eCabinet Systems Software
- Topic: Edgebanding on doors
- Replies: 5
- Views: 1827
Re: Edgebanding on doors
Hi Forrest I think the edge band thing is associated with a few gremlins Maybe you have tracked it down. :D Do you have a edge band material labeled none or do you use the system [None]? I had a material named none, and even now I can create a edge band material named None with zero thickness and ad...
- Tue, Apr 02 2024, 5:50PM
- Forum: eCabinet Systems Software
- Topic: eCabinets Crashes Opening Job
- Replies: 3
- Views: 745
Re: eCabinets Crashes Opening Job
Hi Kerry.
I downloaded your job and tried to load it. I deleted as much hardware as I could. I got the message and typed a different name. It crashed straight away.
I forgot to look at the width it was trying to load. but, Board materials don't have widths so, ㄟ( ▔, ▔ )ㄏ
I downloaded your job and tried to load it. I deleted as much hardware as I could. I got the message and typed a different name. It crashed straight away.
I forgot to look at the width it was trying to load. but, Board materials don't have widths so, ㄟ( ▔, ▔ )ㄏ
- Fri, Mar 15 2024, 1:53AM
- Forum: eCabinet Systems Software
- Topic: Door Issues again
- Replies: 17
- Views: 5044
Re: Door Issues again
In the attached unit its a sharknose door with doors from the door designer. It appears that it is possibly affected by the preview size which is 450mm wide and looses the top back profile cuts. BBQ Sink unit broken doors.hsf The door file that has been saved to the door library sharknose rev1.hsf I...
- Wed, Mar 13 2024, 6:01PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Label printer tools greyed out
- Replies: 2
- Views: 1309
Re: Label printer tools greyed out
Okay.
Got it.
Thanks Clint
Got it.
Thanks Clint
- Mon, Mar 11 2024, 7:25PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Label printer tools greyed out
- Replies: 2
- Views: 1309
Label printer tools greyed out
Just wondering if I could get pointed in the right direction, thanks. I noticed in the upgrade 7.7 and 7.8 that there were some printing options added. However my menu for label printer tools is greyed out. label printer tools.JPG I downloaded the (Crystal Report Runtime for CNC nest reporting) from...
- Mon, Mar 11 2024, 5:18AM
- Forum: eCabinet Systems Software
- Topic: removing the outline cut
- Replies: 2
- Views: 1159
Re: removing the outline cut
Hi Chris
If your setup is similar to mine.
In control nesting under the CNC settings tab "Cut all" is probably selected.
Change it to "no outline cut"s for the group that you put that material into and nest it with those settings.
If your setup is similar to mine.
In control nesting under the CNC settings tab "Cut all" is probably selected.
Change it to "no outline cut"s for the group that you put that material into and nest it with those settings.
- Fri, Mar 08 2024, 6:55PM
- Forum: Thermwood 3-Axis Machinery
- Topic: outline ramp in bug/issue CN 7.08
- Replies: 11
- Views: 3507
Re: outline ramp in bug/issue CN 7.08
Hi Jeremy.
I am pretty certain it has.
I think the file that Clint sent us above would have been incorporated into subsequent updates.
I am pretty certain it has.
I think the file that Clint sent us above would have been incorporated into subsequent updates.