Search found 428 matches

by Mark McCallum
Mon, Feb 19 2024, 6:12PM
Forum: eCabinet Systems Software
Topic: Cabinet with angled ends or tops
Replies: 5
Views: 4395

Re: Cabinet with angled ends or tops

Hi Leo I'm glad that you found it useful. :) That looks like a nice job. Its been a while since I posted this, so details have gone a bit fuzzy. I wish I had of written down the reason why I said to make it larger. :( There would have been some sort of reason, valid or not, but I forget why. Any way...
by Mark McCallum
Wed, Jan 17 2024, 12:22AM
Forum: eCabinet Systems Software
Topic: Door Issues again
Replies: 16
Views: 2449

Re: Door Issues again

Hi Nicholas
PS to the above, I forgot to ask, but you might already be doing a graph screen and the program missed it.
by Mark McCallum
Tue, Jan 16 2024, 11:59PM
Forum: eCabinet Systems Software
Topic: Door Issues again
Replies: 16
Views: 2449

Re: Door Issues again

Hi Nicholas. I'm sorry to see that. :( When I have problems like that , Clint gets me to send in the files for the guys to take a look at. Dare I say it? its not uncommon to have a few glitches until you get it to work by tweaking things. Also with a door like that I like to run a "test" d...
by Mark McCallum
Mon, Jan 01 2024, 7:48AM
Forum: eCabinet Systems Software
Topic: Door Issues again
Replies: 16
Views: 2449

Re: Door Issues again

yes this would be a single Mdf large door made to look like 3 drawers on the bottom and a top door, all out of one piece. I was not aware of the group cabinet parts function thanks for bringing that to my attention, is there a guide for this or should i just mess around until I understand it (kinda...
by Mark McCallum
Mon, Jan 01 2024, 6:49AM
Forum: eCabinet Systems Software
Topic: Profile edge problems
Replies: 3
Views: 1004

Re: Profile edge problems

Hi Forrest and Clint Not sure if it helps. It seems to work on a frameless base unit. Forrest, you could use the rotate cabinet if you needed to display it. I used your .tol tool to apply the bead. I couldn't rotate the tool to apply the smaller groove. (I seem to remember that clicking on the left ...
by Mark McCallum
Thu, Dec 28 2023, 7:34AM
Forum: eCabinet Systems Software
Topic: Door Issues again
Replies: 16
Views: 2449

Re: Door Issues again

Hi Nicholas. So I had a look at your door. And started a new door from scratch in the door designer. First I was having problems with constraining the pattern the way you had drawn it because the points were on top of one another. So I played around with the method a little bit putting in 2mm gaps b...
by Mark McCallum
Fri, Dec 22 2023, 9:48AM
Forum: eCabinet Systems Software
Topic: Door Issues again
Replies: 16
Views: 2449

Re: Door Issues again

Hi Nicholas I haven't had time to try your system. I'm not sure if you are trying to match wood grain and cutting the single door into drawers and door on a panel saw or sliding saw after machining? are you aware of the group door and drawers function? Right click in the cabinet editor, group the pa...
by Mark McCallum
Wed, Dec 13 2023, 6:20PM
Forum: eCabinet Systems Software
Topic: Door Issues again
Replies: 16
Views: 2449

Re: Door Issues again

Hi Nicholas. Definitely do as Scott Mashburn has suggested. You can create doors in the door designer and save them with the constraints for use on multiple cabinets, or edit individual slab doors from the cabinet / assembly editor and save that unit as a one of design. I looked at the (problem has ...
by Mark McCallum
Mon, Dec 11 2023, 6:12PM
Forum: eCabinet Systems Software
Topic: is there Quicker ways to add leg predrills?
Replies: 2
Views: 596

Re: is there Quicker ways to add leg predrills?

Hi Nicholas. I think the way i would do this, is to take that bottom shelf as it is now with all the holes in the correct positions, into the part editor. ( perhaps set up a 250mm / 10 inch one for the template)( So the pattern doesn't load off the part) Go into the contour area, (the button in betw...
by Mark McCallum
Thu, Nov 30 2023, 10:33PM
Forum: eCabinet Systems Software
Topic: ERROR: Edge Banding Has Wrong Body
Replies: 4
Views: 1489

Re: ERROR: Edge Banding Has Wrong Body

Hi Chris I had a random thought on this. Check to see if all your edging materials have an image assigned to it. I had named a material for edge tape called none with a zero thickness. Somehow it lost it's image as in the picture. (I reloaded it from another job that I knew had it on it to show you....
by Mark McCallum
Wed, Nov 29 2023, 1:29AM
Forum: eCabinet Systems Software
Topic: Issue with change hardware in global mod
Replies: 2
Views: 753

Re: Issue with change hardware in global mod

Hey Forrest. You are making me feel good. :joker:
by Mark McCallum
Fri, Nov 17 2023, 8:35PM
Forum: Thermwood 3-Axis Machinery
Topic: Recut feature request
Replies: 2
Views: 879

Re: Recut feature request

Hi Michel. There are lots of settings to suit the way you want to work and it could also depend on the model and features of your machine. This is the way we do it. We don't have auto labeling. so we apply the labels by hand. We print labels and sheet layouts as we cut sheets. As each sheet cuts we ...
by Mark McCallum
Wed, Oct 18 2023, 6:03PM
Forum: Thermwood 3-Axis Machinery
Topic: outline ramp in bug/issue CN 7.08
Replies: 7
Views: 1908

Re: outline ramp in bug/issue CN 7.08

Thanks for the help guys. It was a twofold problem. As well as the ramping issue I also had some jobs with small radiuses that was messing with the roughing and my settings. Of course I had to pick 3 jobs with small radii to test, so from this small sample I was feeling like every job was broken. yo...
by Mark McCallum
Fri, Oct 06 2023, 2:00AM
Forum: Thermwood 3-Axis Machinery
Topic: outline ramp in bug/issue CN 7.08
Replies: 7
Views: 1908

Re: outline ramp in bug/issue CN 7.08

Thomas. Yes.!!!! I thought I was the only one. I have this ramping problem and i am having real problems nesting. I was back and forthing with Clint. (Oposite time zones.) So I presume the guys are working on it. I just write my experience in case you spot whats triggering it. It seems to get progre...
by Mark McCallum
Thu, Sep 28 2023, 7:40PM
Forum: eCabinet Systems Software
Topic: Making GLASS panel slab doors
Replies: 6
Views: 2063

Re: Making GLASS panel slab doors

Hey Stuart. Don't beat yourself up. Ecabs is one complicated program. We all work in our own little silo's and the way we do things tends to be because it worked for that thing last time and we just keep doing it that way. The flexibility that Ecabs offers allows us to approach the same outcome from...

Go to advanced search