Thermwood / eCabinet Systems

I found a utility addon for autocad it's called \"splineConvert\" it does what the name says, convert's splines into arcs so it can now be imported to the shape manager, here's the link:
http://www.xanadu.cz/en/download.asp?file=SplineConvert%20-%20convert%20splines,%20ellipses,%20arcs%20to%202D ...

No not since the update....I guess that'll work, but why does it just happen once in a while that's what i dont get, it's like one for every 20-30 or so....

Walker, I already have v 5.1.3, should it not do this already?

Dan, we also use the tandem box drawers and what i did was set 5 holes for the 500mm track and use that same hole pattern for all the smaller ones since their all at the same place, this way i dont need to change the hole pattern everytime I make a smaller cab, in the editor the holes stick out the ...

Since the last build i've been getting some upper double door cabinets cut on the machine with only one of the four sets of mounting plate holes drilled, and when I check the file in ecab, it shows the mounting plate holes (blue filled holes) but when I explode the cabinet the holes are actually not ...

Wally, I tried that and it works fine but I need a way to get around this without offsetting everytime I change the height of the cabinet or add shelves etc...
I just want to stay away from making more changes to my library cabs since I already have enough as it is, i'm also taking into ...

Nemanja, thanks for the reply but i'm trying to resolve this more for the corner cabs, because of the backs and all, to be able to assemble them without the need to check and make sure the holes line up.

Hey guys, I wanted to get your input on something i've been thinking about for a while.
I would like the shelf holes to be located in the center of the ajustable shelf instead of under so that if my assemblers accidently use two right ends on the same cab or something the holes will still line up ...

Thanks Paul for the tip! Very usefull function.

When I remove the ajustable shelf holes in the part editor and add edgebanding after the mod, it brings back the removed shelf holes.
P.S. I remove the unnecessary shelf holes in corner cabinets if anyone is wondering why.

Another issue with the edgebanding is with the partitions, there is no ...

\" I did'nt do it \"

Yes Mike, I do need to rotate on the Z.

I too would love this feature, since i'm making cutouts in the top of my base corner cabs for easy access to miter bolts under countertops during instalation, then I could rotate the corner cab and make a rectangular cutout much easier.

ah crap....sorry for having wasted your time guys, turns out it was just a dull bit even though it was new....I changed all the bits and the fit seems to be okay now, I still dont have the fit clearance that I enter in ecab but I guess it's just related to the melamine shedding.
Thanks anyways for ...

Something i'd like to add to my previous post. This afternoon I did a test by cutting a cabinet with a 0 fit clearance with 5/8\" mdf and then measured the dado and tenon with a digital micrometer and found that I do not have 0\" fit clearance but rather -.010\"..... so I checked my bit diameter ...